UHMWPE Sheet for Plastic Ice Rink
Plastic ice rinks are manufactured from 100% UHMW PE which will not warp, crack, splinter or corrode. It has become a popular choice for skating boards, hockey playground and many other facilities. Our UHMW PE ice rinks have lots of advantages over real ice.
1. Good skating experience like on real ice
Super smooth surface makes good skating experience like natural ice
2. Easy installation
Easy assembly/disassembly due to the puzzle system that guarantees a flat and level surface of the rink.
3. Cost effective
Low operating and maintenance cost
4.For any type of skates
No special ice skates are required, it can be used with traditional ice skates
5. Any weather any place
The system can be used in any place and in any weather condition.
6. Extensive application
Public ice-skating, hockey schools, sport facilities, etc.
7. Free Play
The same movements, jumps and tricks can be implemented as on real ice
8.Long life span
The lifespan is significantly longer than that of the traditional plastic ice-rinks
9.Any size can be customized
UHMW PE is a kind of engineering plastic with medium price and superior properties. It has almost combines all excellent properties of plastics. It has excellent abrasion resistance, high impact resistance, self-lubricating properties ,outstanding ability against cold ,eco-friendly ,and light weight.
Characters
Made with 100% virgin UHMWPE which is known for its high quality and cost-effective rates. It is no poison, low temperature tenacity, good twisting endurance, excellent chemical erosion, superficial electrical performance within wide frequency range, etc and more rigid and harder than LDPE(low density PE) materials and is three times better in compressive strength.These sheets are widely used in different applications.
Images
Properties for UHMWPE Sheet
| PROPERTIES | Test Method | Unit | Value |
| I.Physical Properties |
| Density | ISO 1183 | g/cm3 | 0.96 |
| Water absorption 24hrs | ISO 62 | % | 0.01 |
| II.Thermal Properties |
| Heat deflection temperature - HDT/A | ISO 75-2 | ºC | 42 |
| Min. service temperature |
| ºC | -269 |
| Max. service temperature-Long Term |
| ºC | 90 |
| Thermal conductivity at 23 ºC | DIN 11359 | W/(K*m) | 0.42 |
| Coefficient of linear thermal expansion | ISO 11359 | 10-4*K-1 | 2 |
| Flammability Rating(6mm thickness) | UL 94 | - | HB |
| III.Mechanical Properties at 23ºC |
| Tensile strength at yield | ISO 527-2 | MPa | 17 |
| Tensile strength at break | ISO 527-2 | Mpa | 40 |
| Elongation at break | ISO 527-2 | % | >50 |
| Modulus of elasticity after tensile test | ISO 527-2 | MPa | 650 |
| Modulus of elasticity after flexural test | ISO 178 | MPa | 800 |
| Hardness - Shore D | DIN 53505 |
| 61 |
| Charpy impact strength | ISO 179 | kJ/m2 | N. B. |
| Friction coefficient | DIN 53375 |
| 0.25 |
| IV.Electrical Properties at 23ºC |
| Dielectric constant at 1 MHz | IEC 60250 | 106Hz | 3.1 |
| Dielectric loss factor at 1 MHz | IEC 60250 | 106Hz | 0.0001 |
| Volume resistively | IEC 60093 | Ohm (Ω) * cm | >1014 |
| Surface resisively | IEC 60093 | Ohm (Ω) | >1011 |
| Dielectric strength | IEC 60243-1 | kV/mm | 45 |
Product Categories : UHMWPE Products > UHMWPE Sheet
